2.1 Isicelo sokubukeka nesakhiwo somkhiqizi we-Eto Gas Sterilizer

2.1.1 Umumo jikelele kufanele unembe, ube nezindawo ezibushelelezi, ezihlanzekile nombala ofanayo. Akufanele kube nama-burrs, imiphetho ebukhali, imifantu, imihuzuko ebonakalayo, noma ukungalingani.
2.1.2 Wonke umbhalo wangaphandle, ihluzo, nezimpawu kumele ziphrintwe ngokucacile, zibe nezimpawu ezinembile neziqinile.
2.1.3 Izinsimbi kufanele zifakwe ngokuphephile. Wonke amaswishi okulawula namafindo okulungisa (noma izinkinobho) kufanele asebenze kahle nangokwethembeka ngaphandle kwezithiyo.

2.2 Isicelo sobukhulu Somkhiqizi Okhiqiza Imbewu ye-Eto Gas

2.2.1 Igumbi lokuvala inzalo kufanele lihambisane nobukhulu bomklamo ngamamilimitha, ngokubekezelela okungu ±1%.
2.2.2 Ukunciphisa imiphumela emibi ezungeze imithwalo yokuvala inzalo, igumbi kufanele ligcine okungenani u-15 mm wokususwa endaweni eshisayo kanye no-30 mm endaweni engashisiswanga.

2.3 Izinto Ezisetshenziswayo kanye Nesicelo Sokwakha Somkhiqizi Okhiqiza Imbewu ye-Eto Gas

2.3.1 Izidingo Ezijwayelekile
2.3.1.1 Umkhiqizi kufanele acacise ingcindezi ephezulu yokusebenza etholakalayo ekukhetheni umsebenzisi.
2.3.1.2 Indawo engaphakathi yegumbi kufanele ifudumale kancane noma iphelele, ihlangabezane nezimfuneko eziseSigabeni 2.13.1.
2.3.1.3 Izinto ezivezwe ku-ethylene oxide (EO) ngaphansi kwezimo zokusebenza kumele:
a) Melana nokugqwala kwegesi ye-EO nezingxube zayo.
b) Ungaphenduli nge-EO noma ukungcola kwayo okwaziwayo.
c) Gwema ukukhuthaza ukwenziwa kwe-EO polymerization noma ukubola.
Insimbi engagqwali noma insimbi enekhabhoni ephansi evikelwe ukugqwala iyanconywa ukuze kwakhiwe.
2.3.1.4 Insimbi enekhabhoni ephansi engalungiswanga akumele isetshenziselwe izingxenye zengcindezi yangaphakathi.
2.3.2 Ukuhlola Amachweba

2.3.2.1 Izikebhe Zezinga Lokushisa

Amakamelo ? 5 m³ kufanele okungenani ibe nezimbobo zezinga lokushisa eziyi-10. Okwamagumbi > 5 m³, engeza imbobo eyodwa ku-cubic meter ngayinye eyengeziwe. Amakamelo ? I-10 m³ idinga ubuncane bezimbobo ezingama-20.
Imbobo ngayinye kufanele igcine okungenani i-100 mm yokuvunyelwa ezithiyoni zangaphakathi noma zangaphandle futhi ihambisane nezindinganiso ze-GB/T7307-2001 zochungechunge lwangaphandle.
2.3.2.2 Amachweba okuhlola i-vacuum

Okungenani imbobo yokuhlola i-vacuum eyodwa kufanele ifakwe ngokuvikelekile, ixhumeke ngqo egumbini. Ichweba kufanele lihlangabezane nezimfuneko ezithile zobukhulu nokuphepha.
2.3.2.3 Amasampula Amachweba

Amakamelo kufanele afake okungenani imbobo yesampula eyodwa yokulinganisa ukugxiliswa kwe-EO noma umswakama ohlobene, ehlangabezana namazinga afanayo namachweba okuhlola i-vacuum.

2.4 Izingxenye, Amapayipi, kanye nokufakwa kwe-Eto Sterilizer Manufacturer

2.4.1 Izingxenye

Zonke izingxenye ezixhunywe ekamelweni kufanele zihambisane nezidingo zezinto ezijwayelekile futhi kube lula ukuzihlanza uma zixhumana ne-EO.
2.4.2 Amapayipi namaFittings

Amapayipi athintana nezibulala magciwane eziwuketshezi kumele angabi nazihibe futhi akhelwe ukuvikela ukuvuza. Amalunga kufanele ashiselwe, ngaphandle kwalapho kudingeka khona ukuhlakazwa ukuze kugcinwe.
2.5 Izicabha, Izilawuli, nezikhiya

2.5.1 Izivalo zeminyango

Iminyango kufanele isebenzise izimpawu ezihambisana nezidingo zezinto ezibonakalayo futhi ivumele ukuhlanzwa kalula noma ukushintshwa.
2.5.2 Ukuzenzakalela kanye Nemisebenzi Yomnyango Wezandla

Iminyango ezenzakalelayo kufanele ihlale ivaliwe uma kwenzeka ugesi wehluleka, kuqinisekiswe ukuphepha. Iminyango eyenziwe ngezandla akumele idinge amandla angaphezu kuka-150 N ukuze isebenze.

2.6 Amavalvu okulawula

Amavalvu kufanele avumele ukulungiswa ngaphandle kokunqamula amapayipi futhi kufanele afake izihlungi zangaphambili ezisebenza kahle kakhulu.

2.7 Izinsiza

2.7.1 Amanzi
Amanzi ane-athomu akufanele ajovwe ngokuqondile.
2.7.2 I-Steam
Umfutho we-Steam wokushisa akufanele udlule i-50 kPa.
2.7.3 Amagesi Omoya kanye Nama-Inert
Umoya kufanele wome, ungabi nawoyela, futhi uhlungwe ukuvimbela ukungcola.

UMA UFUNA UKWAZI OKWENGEZIWE Nge-Ethylene Oxide Sterilization

Ucingo:+8619975258603

I-imeyili:hayley@hzbocon.com

Indawo Yendawo: Igumbi 1202, Caitong Zhongxin, Xiasha District, Hangzhou City, Zhejiang Province, China

Iwebhusayithi:hzbocon.com zjbocon.com