ubuchwepheshe be-eto sterilization uma buqhathaniswa nabanye: Izinzuzo kanye Nobubi Ukuvala inzalo kuyinqubo ebalulekile ekulawuleni ukutheleleka, iqinisekisa ukuthi amathuluzi ezokwelapha […]

Ibanga lokusetha izinga lokushisa le-ETO Sterilization Chamber kufanele libe phakathi kuka-30-60°C. Kunconywa ukwenza ukuhlolwa kokusatshalaliswa kwezinga lokushisa kwendawo yangaphakathi yesibulala-magciwane kanye nokuhlola izinga lokushisa kanye nomswakama wokusabalalisa ngaphakathi kwegumbi lokuvala inzalo ukuze kuqinisekiswe ukusebenza kahle kwezinhlelo zokushisisa nokuswakama.

Inhloso yokuqapha nokulawula ukuvalwa kwe-EO (Ethylene Oxide) ukukhombisa ukuthi inqubo eqinisekisiwe neshiwo yokuvala inzalo isetshenzisiwe emkhiqizweni. Idatha evela kumjikelezo ngamunye wokuvala inzalo kufanele irekhodwe futhi igcinwe ukuze kuqinisekiswe ukuthi ukucaciswa kwenqubo yokuvala inzalo okuqinisekisiwe kuhlangatsheziwe. Lokhu kufanele kufake okungenani okuqukethwe okulandelayo:

I-Process Challenge Device (PCD) iwuhlelo lwenselelo ye-microbiological esetshenziselwa ukuhlola izinga lokubulala lamapharamitha enqubo akhethiwe. Ngokuvamile idivayisi noma iphakheji yokuhlola equkethe izinkomba zebhayoloji (isb., izinhlamvu ze-Bacillus atrophaeus ezinesibalo se-spore esaziwayo). Ukumelana ne-PCD enqubweni yokuvala inzalo kufanele kube kukhulu noma kulingane nokumelana nomthwalo wemvelo we-microbial endaweni okunzima kakhulu ukuyibulala inzalo yomkhiqizo. Inani lama-PCD kufanele lihlangabezane nezidingo ezivezwe kuThebula C.3 leSithasiselo C kokuthi GB18279.1-2015. Ama-PCD ahlukaniswa ama-PCD angaphakathi (IPCD) nama-PCD angaphandle (EPCD).

Ukuqinisekiswa Kokufakwa Kwemboni ye-Eto Sterilizer Ukufakwa kwe-Industrial Eto Sterilizer kanye nazo zonke izinsizakalo ezihambisanayo kufanele kuhambisane nezidingo.

Amanzi okuthambisa asetshenziswa ku-ETO Sterilization Equipment kufanele angabi nakungcola, akufanele enze buthaka inqubo yokuvala inzalo ye-ETO, futhi akumele alimaze isibulala-magciwane, imikhiqizo evalwe inzalo, noma umthwalo. I-Humidification kufanele yenziwe ngokujova isitimu, hhayi ngokujova ngokuqondile amanzi ane-athomu.

I-Hangzhou Bocon Mechanical and Electrical Equipment Co., Ltd., evame ukubizwa ngokuthi i-HZBOCON, igqama njengomkhiqizi ozinikele we-Ethylene Oxide (EO/ETO) obulala amagciwane. Isungulwe ngo-2006, i-HZBOCON izibophezele ekuklameni, ekuthuthukisweni, nasekukhiqizeni imishini yokuvala inzalo ye-EO, ihlinzekela uxhaxha lwezimboni ezidinga izixazululo ezisebenzayo zokuvala inzalo emikhiqizweni ye-thermosensitive.

I-PQ yisigaba sokuqinisekiswa esisebenzisa igumbi lokubulala inzalo e-Ethylene oxide ukukhombisa ukuthi imishini yokuhlanza inzalo ye-ethylene oxide isebenza njalo ngokuya ngezinqubo zokwamukelwa ezinqunyelwe ngaphambili kanye nenqubo enezidingo ezibekiwe futhi ezihlangabezana nezidingo ezicacisiwe.

Ku-OQ, ukusebenza kohlelo olusizayo olufanele kufanele kunqunywe futhi uhlelo lwesoftware kufanele luhlolwe ngokulingisa izimo zephutha.

A.Equipment ukuze isetshenziswe kwinqubo yokufaka inzalo, kufaka phakathi noma yiziphi izinto ezihambisanayo, kuzohambisana nezincazelo zayo zokuqamba.Imidwebo ehambisanayo kufaka phakathi ukucaciswa kokuklama, njll.