December 2024

30 m³ eto গ্যাস জীবাণু নির্বীজনকারী আবাসন, সহায়ক সরঞ্জাম (হিটিং এবং থার্মাল সাইক্লিং ডিভাইস, ভ্যাকুয়াম নিষ্কাশন ডিভাইস, ডোজ এবং বাষ্পীভবন ডিভাইস, আর্দ্রতা যন্ত্র, সিলিং ডিভাইস, অবশিষ্ট গ্যাস প্রক্রিয়াকরণ ডিভাইস), এবং পর্যবেক্ষণ এবং নিয়ন্ত্রণ যন্ত্র নিয়ে গঠিত।

8.4.1 Closing the eto gas sterilizer Discharge Door 8.4.2 Opening the Loading Door 8.4.3 Loading Sterilization Items Use a forklift

The installation and layout diagram of the ethylene oxide eto sterilizer can be found in Appendix C, Figure C.1. 7.1

12m3 eto sterilizer is ready to send to our customer

3.4.1 eto sterilizer machine Temperature Setting Range
The temperature setting range for the eto sterilizer is: 30 to 70°C

If a leak is detected in the eto sterilizer dosing pipeline during the administration process, immediately close the medication bottle, switch and the dosing valve on the main unit. Turn on the axial fan to ensure proper ventilation, and then proceed with repairs.

Note: Regardless of whether the equipment is in normal operation, malfunction, or maintenance state, if personnel need to enter the

Note 1: The Ethylene Oxide sterilization conditions must be obtained through validation confirmation and should be verified with monitoring and

The temperature of representative areas on the inner surfaces should be measured and recorded using temperature recording instruments that comply with the requirements of Appendix B.

Appearance Inspection: Check the main unit, control rack, and electrical control cabinet for any damage on the surface.