ETO灭菌室的温度设定范围应在30-60°C之间。建议进行灭菌器内表面温度分布测试和灭菌室内温湿度分布测试，以保证加热加湿系统的有效性。

Routine Monitoring and Control The purpose of routine monitoring and control of EO (Ethylene Oxide) sterilization is to demonstrate that

3.4.1.1 Production of Process Challenge Devices (PCD) A Process Challenge Device (PCD) is a microbiological challenge system used to evaluate

Industry Eto Sterilizer Installation Verification The installation of Industry Eto Sterilizer and all associated services should comply with the requirements

ETO灭菌设备使用的加湿水应无污染物，不应削弱ETO灭菌过程，并且不应损坏灭菌器、灭菌产品或负载。加湿应通过注入蒸汽来完成，不能直接注入雾化水。

杭州博康机电设备有限公司，俗称HZBOCON，是一家专业的环氧乙烷（EO/ETO）灭菌器制造商。 HZBOCON成立于2006年，致力于环氧乙烷灭菌设备的设计、开发和制造，满足各行业需要有效热敏产品灭菌解决方案的需求。

PQ 是验证阶段，使用环氧乙烷灭菌室来证明环氧乙烷灭菌设备始终按照预定的验收标准运行，并且该过程产生的产品是无菌的并满足指定的要求。

OQ is undertaken to demonstrate the ability of the ETO STERILIZATION MACHINE to meet the performance requirements of its design

Iq in eto sterilization process is undertaken to demonstrate that the sterilization equipment and any ancillary items have been supplied

Low-Temperature Sterilization: Ethylene oxide sterilizer operate at low temperatures, making them ideal for sterilizing heat-sensitive medical devices and instruments. This