8.4.1 Closing the eto gas sterilizer Discharge Door

1. For double-door eto gas sterilizer, before loading sterilization goods, follow the closing procedure for the discharge door, and inflate the sealing gasket of the discharge door until the pressure reaches above 0.45 MPa to ensure a proper seal.
2. Manually adjust the direction control valve to close the air source of the cylinder at the discharge door end, allowing the pneumatic system to supply air only to the loading door cylinder. Ensure that the air pressure is greater than 0.45 MPa.
3. Before loading sterilization goods, first open the air belt valve on the loading door to release air from the air belt. After a delay of 30 seconds, prepare for the indicator light to turn on.

8.4.2 Opening the Loading Door

1. After confirming safety, operate the loading door rise button to lift the door body, raising it approximately 120 mm.
2. The operator pulls the door handle to open the door, rotating it approximately 95° to 100°.
3. When the door body collides with the limit block, confirm safety, then press the loading door down button to release the air from the cylinder, allowing the door body to fall to the ground or onto a support. At this point, the door body should not rotate.
4. Once the door body has lowered to position, the door opening operation is complete.

8.4.3 Loading Sterilization Items

Uża forklift biex tagħbija oġġetti ta 'sterilizzazzjoni fil-kabinett ta' sterilizzazzjoni. L-oġġetti għandhom ikunu f'munzelli pulit bi spazjar raġonevoli, u jħallu għoli ta 'mhux inqas minn 100 mm bejn l-oġġetti u l-parti ta' fuq tal-kamra.

8.4.4 L-għeluq tal-Bieb tat-Tagħbija

1. Wara li tikkonferma li l-oġġetti ta 'sterilizzazzjoni huma mgħobbija bis-sħiħ, fi stat ta' sigurtà kkonfermata, agħfas il-buttuna tat-tlugħ tal-bieb tat-tagħbija biex tgħolli l-korp tal-bieb madwar 120 mm.
2. L-operatur jiġbed il-manku tal-bieb biex idawwar il-bieb, jallinjaha mal-qafas tal-bieb wara li jdur bejn wieħed u ieħor 95 ° sa 100 °.
3. Wara li tikkonferma s-sigurtà, agħfas il-buttuna 'l isfel tal-bieb tat-tagħbija biex teżawrixxi ċ-ċilindru, li tippermetti lill-korp tal-bieb joqgħod fuq il-ganċ tal-qabda tal-bieb.
4. Ladarba l-bieb jingħalaq sew, id-dawl indikatur jinxtegħel (stat li jteptep).
5. Iftaħ il-valv biex jintefaħ iċ-ċinturin tal-arja; ladarba s-siġillar taċ-ċinturin ta 'l-arja jitlesta, id-dawl indikatur jibqa' mixgħul kontinwament, u jindika li l-operazzjoni ta 'għeluq tal-bibien hija kompluta.

Nota: L-operazzjonijiet ta 'sterilizzazzjoni jistgħu jibdew biss wara li l-bieb ikun magħluq b'mod sikur.

Jekk trid tkun taf aktar

Telefon:+8619975258603

Email:hayley@hzbocon.com

Sit Lokali: Kamra 1202, Caitong Zhongxin, Distrett Xiasha, Belt Hangzhou, Provinċja ta 'Zhejiang, Ċina

Websajt:hzbocon.comzjbocon.com