Protection mechanism and explanation OF ETO Sterilizer System
- ETO sterilizer system has six different levels of operation permissions. Personnel with different permissions can operate different contents to prevent operation confusion, or equipment failure or safety accident caused by operation by personnel without professional training
2. By default, the system will perform the leak detection test before dosing of each batch. If the leak detection test fails, the system will automatically stop the cycle and no longer continue, and the alarm will prompt
3.If the cabinet body leaks during the exposure stage of the equipment, the ETO chamber System will automatically jump to the cleaning stage to ensure that EO will not leak into the workshop and cause safety accidents
4. When the equipment is in operation, if it wants to stop the cycle halfway, the system will automatically jump to a safe processing process according to different operating conditions. For example, after dosing, the system needs forced cleaning to reset the whole process.
5. If the system is equipped with an electronic scale, as long as the equipment is powered on, you can check whether the weight of the EO cylinder changes abnormally at any time, so as to timely notify the equipment maintenance personnel of potential safety hazards
6. The ETO chamber System has the function of ultra-high pressure detection and protection. If the system detects that the pressure in the cabinet is greater than the maximum allowable pressure, whether the equipment is in operation or not, the vacuum pump must be forced to start to reduce the pressure in the cabinet to prevent the gas in the cabinet from leaking into the workshop, or the cabinet will be damaged by the high pressure in the cabinet
7.Each time the door is opened, the ETO chamber System will check whether the pressure in the cabinet is within the safe range, and whether the operation state in the cabinet is in the safe state, otherwise the door will be locked and cannot be opened
8.In order to ensure personal safety, the equipment can be equipped with a harmless exhaust system. After the cabinet door is opened, ensure that the air in the workshop can only enter the cabinet, but cannot be discharged from the cabinet to the workshop environment
9.If the equipment has been cleaned but the door has not been opened, the system will automatically check the unloading timeout. If the unloading timeout is more than 30 minutes, the door will be locked and cannot be opened, and the cleaning process must be executed again. This function is used to ensure that EO in the product will not be slowly released into the workshop environment, causing pollution to the workshop environment and personal health damage
10. सम्पूर्ण नियन्त्रण प्रणालीमा सबै प्रकारका उपकरणहरू र सेन्सरहरूको लागि आत्म-निदान प्रकार्य छ, जुन सेन्सर विफलताको अवस्थामा उपकरणको असामान्य सञ्चालन रोक्न प्रयोग गरिन्छ, र एकै समयमा मर्मत कर्मचारीहरूलाई के सेन्सर वा उपकरण असफल भएको छ भनेर संकेत गर्नुहोस्, ताकि मर्मत कर्मचारीहरूले चाँडै फेला पार्न र समस्याहरू समाधान गर्न सकून्।
11.The ETO sterilizer SYSTEM मा 100 भन्दा बढी गल्ती र अलार्म जानकारी छ, जसले अपरेटरहरू र मर्मत कर्मीहरूलाई समयमै र सही तरिकाले उपकरणको सञ्चालन जान्न अनुमति दिन्छ, ताकि मर्मत कर्मचारीहरूले चाँडै समस्याहरू फेला पार्न र समाधान गर्न सक्छन्।
12. प्रक्रिया प्यारामिटरहरू डाउनलोड गरेपछि, यदि त्यहाँ अनुचित प्यारामिटरहरू छन् भने, मापदण्डहरू अव्यावहारिक हुँदा सम्पूर्ण ब्याचको सञ्चालनलाई असफल हुनबाट रोक्न डाउनलोड विफलताको प्रम्प्ट हुनेछ।
13. प्रक्रिया प्यारामिटरहरू डाउनलोड गरेपछि, यदि त्यहाँ अनुचित प्यारामिटरहरू छन् भने, मापदण्डहरू अव्यावहारिक हुँदा सम्पूर्ण ब्याचको सञ्चालनलाई असफल हुनबाट रोक्न डाउनलोड विफलताको प्रम्प्ट हुनेछ।
14. बाह्य बिजुली आपूर्तिको हानिको अवस्थामा, UPS ले प्रणालीमा बिजुली आपूर्ति गर्न जारी राख्नेछ, र उपकरणले निलम्बित अवस्थासँग सम्झौता गर्नेछ कि पावर विफलता पछि उपकरण चुहावट नहुने सुनिश्चित गर्न, र कम्तिमा 15 मिनेटको सुरक्षा बफर समय सुनिश्चित गर्न। सामान्य सञ्चालन प्रक्रिया मार्फत उपकरण बन्द भएपछि, बाह्य शक्ति पुनर्स्थापित हुँदा उपकरण अझै पनि सञ्चालन गर्न जारी राख्न सक्छ।
15. प्रणाली सञ्चालनको क्रममा IPC असफल हुँदा, IPC सिधै पुन: सुरु गर्न सकिन्छ, र सफ्टवेयरले स्वचालित रूपमा मूल रेकर्ड जडान गर्न सक्छ।
16. प्रणालीमा विस्तृत लेखापरीक्षण ट्र्याकिङ प्रकार्य छ, जसले पछिको चरणमा दुर्घटना विश्लेषण र गल्ती रोकथामको सुविधाको लागि लगभग सबै सञ्चालन कार्यहरू रेकर्ड गर्न सक्छ।
सम्पर्क गर्नुहोस्
फोन:+८६१९९७५२५८६०३
इमेल:hayley@hzbocon.com
स्थानीय साइट: कोठा 1202, Caitong Zhongxin, Xiasha जिल्ला, Hangzhou शहर, Zhejiang प्रान्त, चीन
वेबसाइट:hzbocon.comzjbocon.com