ETO Sterilizer ڪارڪردگي کي سمجھڻ: ڪارڪردگي جي ڪنجي
3.4.1 eto sterilizer machine Temperature Setting Range
The temperature setting range for the eto sterilizer is: 30 to 70°C
ETO Sterilizer ڪارڪردگي کي سمجھڻ: ڪارڪردگي جي ڪنجي وڌيڪ پڙهو
Ethylene Oxide Leak Handling when using eto sterilizer
If a leak is detected in the eto sterilizer dosing pipeline during the administration process, immediately close the medication bottle, switch and the dosing valve on the main unit. Turn on the axial fan to ensure proper ventilation, and then proceed with repairs.
Ethylene Oxide Leak Handling when using eto sterilizer وڌيڪ پڙهو
Safety Requirements for Using Ethylene Oxide in sterilization
Note: Regardless of whether the equipment is in normal operation, malfunction, or maintenance state, if personnel need to enter the
Safety Requirements for Using Ethylene Oxide in sterilization وڌيڪ پڙهو
Microbial Killing Performance of Ethylene Oxide Sterilizers
Note 1: The Ethylene Oxide sterilization conditions must be obtained through validation confirmation and should be verified with monitoring and
Microbial Killing Performance of Ethylene Oxide Sterilizers وڌيڪ پڙهو
eto sterilization Chamber Temperature Distribution Testing
The temperature of representative areas on the inner surfaces should be measured and recorded using temperature recording instruments that comply with the requirements of Appendix B.
eto sterilization Chamber Temperature Distribution Testing وڌيڪ پڙهو
Preparatory Work Before eto Sterilization
Appearance Inspection: Check the main unit, control rack, and electrical control cabinet for any damage on the surface.
Preparatory Work Before eto Sterilization وڌيڪ پڙهو
EO sterilization equipment and process characteristic patterns and effect analysis
Start cycle phase(Select parameters/sterilization recipe) Serial number Potentially risky content Risk assessment under existing process conditions Risk assessment of the
EO sterilization equipment and process characteristic patterns and effect analysis وڌيڪ پڙهو
ETO sterilizers لاء سار سنڀال ھدايت
9.1 During ETO Sterilization, operators are not allowed to leave the operating area and must continuously observe the ETO Sterilization process. If any abnormal phenomena occur, the machine must be immediately shut down, and the power supply should be cut off for inspection.
ETO sterilizers لاء سار سنڀال ھدايت وڌيڪ پڙهو
ايٽو گيس اسٽريلائيزيشن جا شرط ۽ وصفون
For the purposes of this document, the following terms and definitions apply in ethylene oxide sterilization 3.1 Aeration part of
ايٽو گيس اسٽريلائيزيشن جا شرط ۽ وصفون وڌيڪ پڙهو
eo sterilization کان اڳ تياري جو ڪم
ظاهري معائنو: مکيه مشين جي سطحن تي ڪنهن به نقصان جي چڪاس ڪريو، ڪنٽرول ريڪ، ۽ برقي ڪنٽرول ڪابينا.
پاور سپلائي چيڪ ڪريو: پڪ ڪريو ته بجلي جي فراهمي جي ضرورتن کي پورو ڪري ٿو ۽ پاڻي جي پمپ ۽ ويڪيوم پمپ جي گردش جي هدايت کي چيڪ ڪريو.
پاور آن ڪريو ۽ مشاهدو ڪريو ته ڇا اوزار ڊسپلي قدر عام آھن؛ ٻي صورت ۾، بجلي بند ڪريو، ٻيهر شروع ڪرڻ کان اڳ معائنو ۽ مرمت ڪريو.
پائپ لائن جو معائنو: پاڻي جي فراهمي، ويڪيوم، ۽ دوائن جي ترسيل پائپ لائنن ۾ ليڪ جي چڪاس ڪريو، ۽ پڪ ڪريو ته سڀئي والوز اسٽينڊ بائي موڊ ۾ آهن؛ جيڪڏهن ضروري هجي ته ترتيب ڏيو.
eo sterilization کان اڳ تياري جو ڪم وڌيڪ پڙهو