Sterilizer ETO Spitalor/Laborator

A、Satety

Our Hospital / Laboratory ETO Sterilizer use Negative pressure sterilization, negative pressure cleaning, negative pressure residue removal, the whole process of negative pressure to ensure safety!

This hospitel eto sterilizer belongs to class B sterilizer, the sterilization temperature can be adjusted in 30℃~55℃. Sterilization, cleaning and residue removal processes, the sterilizer always maintains a relative negative pressure to ensure that ethylene oxide does not leak.

Even if leakage occurs, the control system will automatically detect the leakage, and automatically abort the sterilization process to send an alarm, and automatically discharge the ethylene oxide gas.

B、Residue removal and aeration

When the hospital eto sterilizer sterilization process reaches the end of the cleaning process, it automatically enters the residue removal (to fully ensure that the EO residue of the sterilized articles is minimized).

C、Continuous temperature monitoring

=Sterilization stage temperature is maintained within the selected temperature ± 3 ℃, once the temperature sensor detects a deviation from the predetermined temperature of 3 ℃, then the over-temperature protection device is automatically activated, and the text prompts the temperature abnormality and alarm, and interrupt the heating.

D、Humidity control

The humidity sensor is open and displayed throughout the sterilization process. According to the set humidity value, humidification is uniformly applied several times to ensure the right humidity level.

F、Automatically control of puncturing EO gas cartridge

Only when the dosing process is entered normally will the system automatically activate the dosing unit, puncturing the EO gas cartridge and releasing the ethylene oxide gas.

G、Sterilization process status display

Located in front of the liquid crystal display real-time continuous display of the sterilization process status. (e.g. temperature, humidity, pressure, time, sterilization process, etc.)