3.4.1 eto sterilizer machine Temperature Setting Range
The temperature setting range for the eto sterilizer is: 30 to 70°C
Understanding ETO Sterilizer Performance: Keys to Efficiency Read more
If a leak is detected in the eto sterilizer dosing pipeline during the administration process, immediately close the medication bottle, switch and the dosing valve on the main unit. Turn on the axial fan to ensure proper ventilation, and then proceed with repairs.
Ethylene Oxide Leak Handling when using eto sterilizer Read more
Note: Regardless of whether the equipment is in normal operation, malfunction, or maintenance state, if personnel need to enter the
Safety Requirements for Using Ethylene Oxide in sterilization Read more
Note 1: The Ethylene Oxide sterilization conditions must be obtained through validation confirmation and should be verified with monitoring and
Microbial Killing Performance of Ethylene Oxide Sterilizers Read more
The temperature of representative areas on the inner surfaces should be measured and recorded using temperature recording instruments that comply with the requirements of Appendix B.
eto sterilization Chamber Temperature Distribution Testing Read more
Appearance Inspection: Check the main unit, control rack, and electrical control cabinet for any damage on the surface.
Preparatory Work Before eto Sterilization Read more
Start cycle phase(Select parameters/sterilization recipe) Serial number Potentially risky content Risk assessment under existing process conditions Risk assessment of the
EO sterilization equipment and process characteristic patterns and effect analysis Read more
9.1 During ETO Sterilization, operators are not allowed to leave the operating area and must continuously observe the ETO Sterilization process. If any abnormal phenomena occur, the machine must be immediately shut down, and the power supply should be cut off for inspection.
ইটিও স্টেরিলাইজারের জন্য রক্ষণাবেক্ষণ গাইড Read more
For the purposes of this document, the following terms and definitions apply in ethylene oxide sterilization 3.1 Aeration part of
ইটো গ্যাস জীবাণুমুক্তকরণের শর্তাবলী এবং সংজ্ঞা Read more
Appearance Inspection: Check for any damage on the surfaces of the main machine, control rack, and electrical control cabinet.
Power Supply Check: Ensure the power supply meets the requirements and check the rotation direction of the water pump and vacuum pump.
পাওয়ার চালু করুন এবং যন্ত্র প্রদর্শন মান স্বাভাবিক কিনা তা পর্যবেক্ষণ করুন; অন্যথায়, পুনরায় চালু করার আগে পাওয়ার বন্ধ করুন, পরিদর্শন করুন এবং মেরামত করুন।
Pipeline Inspection: Check for leaks in the water supply, vacuum, and medication delivery pipelines, and ensure all valves are in standby mode; adjust if necessary.
ইও জীবাণুমুক্তকরণের আগে প্রস্তুতিমূলক কাজ Read more