3.4.1 eto sterilizer machine Temperature Setting Range
The temperature setting range for the eto sterilizer is: 30 to 70°C
Understanding ETO Sterilizer Performance: Keys to Efficiency Baca selengkapnya
If a leak is detected in the eto sterilizer dosing pipeline during the administration process, immediately close the medication bottle, switch and the dosing valve on the main unit. Turn on the axial fan to ensure proper ventilation, and then proceed with repairs.
Ethylene Oxide Leak Handling when using eto sterilizer Baca selengkapnya
Note: Regardless of whether the equipment is in normal operation, malfunction, or maintenance state, if personnel need to enter the
Safety Requirements for Using Ethylene Oxide in sterilization Baca selengkapnya
Note 1: The Ethylene Oxide sterilization conditions must be obtained through validation confirmation and should be verified with monitoring and
Microbial Killing Performance of Ethylene Oxide Sterilizers Baca selengkapnya
The temperature of representative areas on the inner surfaces should be measured and recorded using temperature recording instruments that comply with the requirements of Appendix B.
eto sterilization Chamber Temperature Distribution Testing Baca selengkapnya
Appearance Inspection: Check the main unit, control rack, and electrical control cabinet for any damage on the surface.
Pekerjaan Persiapan Sebelum Sterilisasi eto Baca selengkapnya
Start cycle phase(Select parameters/sterilization recipe) Serial number Potentially risky content Risk assessment under existing process conditions Risk assessment of the
EO sterilization equipment and process characteristic patterns and effect analysis Baca selengkapnya
9.1 During ETO Sterilization, operators are not allowed to leave the operating area and must continuously observe the ETO Sterilization process. If any abnormal phenomena occur, the machine must be immediately shut down, and the power supply should be cut off for inspection.
Panduan Perawatan Alat Sterilisasi ETO Baca selengkapnya
For the purposes of this document, the following terms and definitions apply in ethylene oxide sterilization 3.1 Aeration part of
Istilah dan definisi sterilisasi gas eto Baca selengkapnya
Pemeriksaan Penampilan: Periksa apakah ada kerusakan pada permukaan mesin utama, rak kendali, dan kabinet kendali kelistrikan.
Pemeriksaan Catu Daya: Pastikan catu daya memenuhi persyaratan dan periksa arah putaran pompa air dan pompa vakum.
Nyalakan daya dan amati apakah nilai tampilan instrumen normal; jika tidak, matikan aliran listrik, periksa dan perbaiki sebelum menghidupkan kembali.
Inspeksi Saluran Pipa: Periksa kebocoran pada pipa pasokan air, vakum, dan pengiriman obat, dan pastikan semua katup dalam mode siaga; sesuaikan jika perlu.
Pekerjaan Persiapan Sebelum Sterilisasi eo Baca selengkapnya