- According to international standards, when the negative pressure exceeds 50 kPa, it is classified as a pressure vessel. Therefore, we strictly adhere to the design and manufacturing standards for pressure vessels in the production of our ethylene oxide sterilizers. We have rigorously controlled everything from the height of the water jacket to the thickness of the casing to ensure that it can maintain normal operating conditions under a pressure of 90 kPa throughout the year. To comply with pressure vessel manufacturing specifications, after welding each casing, we use stress-relief equipment to weaken and reduce welding stress. This ensures the quality of the water jacket welds and their flexibility, allowing each device to operate stably over the long term and maintain stability under prolonged negative pressure conditions. Additionally, through X-ray inspection, we can effectively guarantee the design life of the equipment to be 20 years.
- The pressure holding test is conducted in a room temperature environment. At -90 kPa, the pressure is maintained for 10 hours, with a pressure variation not exceeding 2 kPa; at +80 kPa, the pressure is similarly held for 10 hours, with the same pressure variation limit. These measures fully ensure safety and stability.
- We use a patented heating water jacket that features energy-saving and consumption-reducing characteristics, along with a high heating rate.
- bocon eto sterilizer uses a patented external air-filled sealing ring, which ensures sealing effectiveness without the need for oiling. It has a protection function during power outages, continuously ensuring seal integrity. This sealing ring has a long service life, effectively reducing users’ nga utu me nga raruraru haumaru.
- Ko te matotoru o te bocon eto sterilizer casing ka mahia ma te whakamahi i nga pereti oko pehanga, kaore he rereketanga. Neke atu i te 10 tone te taumaha o te waahanga katoa i runga ake i nga paerewa ahumahi, me te whakarite kia tutuki to maatau whakaaro hoahoa. Kei te waatea nga rekoata kua tuhia, a he nui te paanga o tenei utu ki nga rereketanga utu.
- Ko te papu korehau a to taatau kamupene e tango ana i te tohu Tiamana “Siemens” bipolar vacuum pump, me nga waahanga rere i hangaia mai i te rauemi 316L (ki te whakarite i te kaha ki te pupuri -90 kPa mahi korehau mo te wa roa). I tua atu, kua oti i a maatau nga mahi penei i te pāmahana wai me te aroturuki rere. Ko nga waahanga matua e whakatau ana i te oranga o te taputapu me te roa me te pumau o tana mahi.
- Our dosing system is equipped with an electronic scale and specialized instruments imported from the USA, capable of pressure control as well as weight control, to achieve true flow and temperature readings. The powerful dosing rate greatly enhances work efficiency and shortens cycle times, ensuring that no impurities or liquids enter the chamber, effectively guaranteeing the equipment’s performance.
- We utilize energy-efficient magnetic fans as circulation devices, featuring high airflow and high pressure, eliminating the need for water cooling and energy consumption, with low power usage that effectively reduces operational costs. Compared to industry counterparts, this significantly improves safety and stability.
- All our company’s circulation pumps, vaporization pumps, and fans are equipped with explosion-proof motors and use new energy-saving technologies, effectively lowering operating costs and greatly enhancing safety.
- During the humidification process, we employ a unique design that effectively filters out impurities and moisture from steam, ensuring that no moisture enters the interior of the chamber.
- The harmless exhaust system employs two flanged double-eccentric butterfly valves (non-liner butterfly valves), effectively ensuring the system’s lifespan, safety, and stability.
- The air filter utilizes a 20-core high-precision stainless steel filter, ensuring a transition from -90 kPa to -10 kPa within 30 minutes. Compared to simpler filters used by industry peers, our filters guarantee higher filtration precision and rate.
- Our control system is a comprehensive control system optimized based on domestic and international client needs and suggestions. It uses genuine international first-line brand electrical components and can connect with enterprise MES systems and databases to meet future upgrade requirements. The system can set various parameters and is widely applicable across different processes and products, ensuring the accuracy of data collection and recording.
- We were the first in the industry to develop a control system that supports parameter release processes, fully meeting new standards for parameter release while retaining most of the foresight. Alarming items, summary items, and configurable parameters number in the hundreds, while it can store hundreds of process menus.
- All software for our control systems is either independently developed or uses licensed software, completely eliminating potential risks associated with non-compliant usage for customers.
- The uniformity of the device’s no-load temperature performance reaches an average temperature variance of ±2?, and the spatial humidity uniformity reaches an average temperature variance of ±5% RH.
- All sensors can be calibrated online without the need for disconnection.
Mena kei te pirangi koe ki te mohio ano mo te bocon eto sterilizer
Waea:+8619975258603
Īmēra:hayley@hzbocon.com
Pae Rohe: Room 1202, Caitong Zhongxin, Takiwa Xiasha, Hangzhou City, Zhejiang Province, Haina
paetukutuku:hzbocon.comzjbocon.com