ليکڪ جو نالو: Bocon ٽيڪنيڪل ٽيم

In OQ, the performance of the relevant auxiliary system should be determined and the software system should be tested by simulating the fault conditions.

a.Equipment to be used in the sterilization process, including any ancillary items, shall comply with its design specifications.The corresponding documents include functional design specifications, user requirements specifications, design drawings, etc. (Equipment schematic diagram, energy supply diagram, electrical schematic diagram, system schematic diagram, etc.)

Ethylene oxide sterilizer operate at low temperatures, making them ideal for sterilizing heat-sensitive medical devices and instruments. This characteristic allows for the preservation of the integrity and functionality of complex medical devices that might be damaged by heat.

Protection mechanism and explanation OF ETO Sterilizer System 2. By default, the system will perform the leak detection test before

1.Purpose for validation eto sterilization 1.1.the obtain of eto sterilization validation evidence that the equipment used for ETO sterilization has been

ethylene oxide in sterilization Introduction ETO is a colorless gas that is flammable and explosive. The four essential parameters (operational

The Detail EtO Sterilization Cycle A typical EtO sterilization cycle comprises three main stages: Preconditioning This stage prepares the chamber

Eto Sterilization is conducted using a eto sterilizer located in a dedicated facility.

Ethylene Oxide (EtO or EO) sterilization is a colorless gas broadly utilized in different businesses, including the generation of materials, individual care items, and the eto sterilization of therapeutic gadgets, makeup, and flavors. EtO is an essential strategy for sterilizing restorative gadgets, playing a crucial part in avoiding contamination in patients experiencing surgical methods and other restorative treatments.

advantage: This is a cost-effective, widely-used sterilization method that has been common for many years, when you buy the machine, you can sterilize by yourself, and the cost is very cheap.large volume (1-36pallet) (around 1-35ton spice one time, depending on the density Of spice )
disadvantage: ETO is a heavily-regulated, gas. And will take more time than the other two sterilization way(you can install a pre-heating room and aeration room to solve this problem).