What is the temperature control precision of Bocon's heating system?

Our systems are engineered for high-precision thermal stability, typically achieving a temperature uniformity of ±1°C or better within the chamber. This is managed via high-performance Siemens PLC controllers and redundant RTD sensors to meet the strict requirements of ISO 11135.

How does Bocon handle safety in explosive EtO environments?

Safety is paramount as EtO is highly flammable. Bocon utilizes ATEX or IECEx-certified explosion-proof fans and heating elements. The system includes an automated nitrogen purging cycle and real-time monitoring of gas concentrations to ensure the heating process only occurs under safe, non-explosive conditions.

Can the Hot Air System be integrated with existing SCADA systems?

Yes. Our control architecture is built on industrial standards (typically Siemens or Allen-Bradley). We provide full integration capabilities with factory-level SCADA or MES systems, allowing for automated data logging, audit trails, and compliance with 21 CFR Part 11 for electronic records.

ETO sterilizer hot air system

Q: Why is high-velocity air circulation critical for EtO sterilization?

EtO sterilization depends on the 'Big Four' parameters: Gas concentration, Humidity, Time, and Temperature. Bocon's Hot Air System ensures that heat and moisture are distributed uniformly throughout the entire chamber load, eliminating cold spots and ensuring that the EtO gas can penetrate medical devices effectively, regardless of their position in the chamber.

BOCON Hot Air Eto Sterilizer Specifications

Conformitate: EN 1422, CE, ISO 13485 Support: FAT, SAT, DQ, IQ, OQ, PQ

01. Select Chamber Volume

Suport de inginerie

Custom dimensions and automated conveyor systems are available upon request.

INQUIRE NOW →

Bocon Hot Air Jacket ETO Sterilizer VS Traditional Water Jacket EO Sterilizer

Feature / Specification	Bocon Hot Air Jacket System	Traditional Water Jacket System
Heating Efficiency	High: Uniformly blankets chamber and doors directly.	Lower: Indirect heat transfer via water medium.
Energy Consumption	Optimized: Only heats product load and air.	High: Significant energy wasted to maintain water temperature.
Heat-up Time (from 21°C)	Rapid: Less than 3 hours.	Slow: Requires heating large volumes of water first.
Maintenance Requirements	Low: Dry system, no additives or water pumps.	High: Constant monitoring of corrosion and seal replacements.
Corrosion Risk	Zero: Eliminates rust and mineral build-up.	High: Prone to scaling and internal corrosion.
Leak Impact	Minor: Non-critical for performance and easily repaired.	Critical: Causes thermal instability and safety hazards.
Weight & Logistics	Light: Easier rigging, installation, and lower shipping costs.	Heavy: Complex structural requirements for installation.

De ce să alegeți sterilizatorul BOCON EO?

Technological Excellence vs. Conventional Industry Standards.

180 de tone/lună Apa economisită pentru o cameră de 20 m³
(Echipată cu separator gaz-apă)

230.000 RMB / an Economie de energie electrică (unitate de 100 m³)
Pe baza tarifelor de putere industrială din China

Air Jacket System Exclusiv Bocon
Maintenance-free Hot Air Tech

Centralized Heating Stabilitate redundantă a pompei duble
for Multi-unit Layouts

1. Tehnologia pompei de vid

Articol	BOCON	ALŢII
Opțiuni pompe de vid	Șurub uscat / Inel de apă / Inel de ulei (mai multe opțiuni disponibile)	De obicei, numai Pompă cu inel de apă
Nivelul maxim de vid	Până la -101,27 kPa (pompa cu șurub uscat)	Aproximativ. -90 kPa
Consumul de apă	With BOCON Separator gaz-apa: Water replaced once per week	Consum continuu de apa
Întreţinere	Întreținere redusă (pompă uscată), fără risc de emulsionare a uleiului	Schimbarea frecventă a uleiului (pompa de ulei) sau performanță limitată

2. Performanță de economisire a apei

Exemplu: O pompă cu inel de apă de 5,5 kW consumă aproximativ 20 de litri pe minut. Pentru o cameră de sterilizare de 20 m³ cu 8 cicluri de vid (22 minute fiecare), consumul total de apă pe ciclu ajunge la 3,52 tone.

Cu 14 cicluri pe săptămână, consumul total săptămânal depășește 49 de tone. După instalare Separatorul exclusiv de gaz-apă BOCON sistem, înlocuirea apei este necesară o singură dată pe săptămână, economisind aproximativ 45 tons of water per week (approx. 180 tons per month). This is especially valuable in water-scarce regions.

3. Sterilizer Chamber Design

Articol	BOCON	ALŢII
Chamber Type	Water Jacket / Air Jacket (Hot Air System)	Water Jacket Only
Heating Speed	Fast heating & cooling (Air Jacket)	Slower temperature transition
Întreţinere	No leakage risk, long service life (Air Jacket)	Water leakage risk over time
Space Requirement	Compact installation, suitable for multi-unit layout (Air Jacket)	Larger footprint

4. Exclusive EG Burner System

Articol	BOCON	ALŢII
Tratamentul de evacuare	Arderea deșeurilor gaz + lichid cu recuperare de energie	Numai ardere (gaz) sau doar scruber
Recuperarea Energiei	Gazele de ardere la temperatură ridicată încălzesc apa pentru utilizarea sterilizatorului	Fără recuperare de energie
Manipularea deșeurilor lichide	Combustie integrată a deșeurilor lichide	Scrubberul nu poate trata deșeurile lichide

5. Centralized Heating System

Articol	BOCON	ALŢII
Proiectarea sistemului	Încălzire centralizată cu redundanță pompe duble	Unică unitate de încălzire a apei
Stabilitatea sistemului	Pompa de rezervă asigură funcționarea continuă	Sistemul se oprește dacă pompa se defectează
Aplicație	Potrivit pentru mai multe sterilizatoare într-un singur atelier	Incalzire individuala pe unitate

Full Technical Specifications & Properties

BOCON Hot Air ETO Sterilizer System Details

Feature Category	Technical Specification
STANDARDS & PHYSICAL ACCESS
System Design Standards	EN1422, ISO11135-2014
Door Configuration	2 Doors; Pneumatic translation seal (Default); Optional: Rotary or Lifting
CONTROL SYSTEM & DATA INTEGRITY
System Control Mode	Soft Manual & Full-Automatic
Data Recording	Interval mode & Warning triggered mode; Continuous curve recording
Data Storage Lifecycle	10 Years (Secure HDD Storage)
Data Processing	PC Monitoring & Specialized Sterilization Data Software
SENSORS & PRECISION
Temp Control Precision	Inside: ±3°C \| Wall: ±5°C (Res: 0.1°C)
Pressure Management	Range: -100 to +150Kpa; Res: 0.1Kpa; Resistance: up to 80KPa (Standard)
Vacuum Performance	< 30 minutes (0 to -90KPa); Continuous/Stepping modes
Humidity Performance	0-100%RH (non-condensing); Resolution: 0.1%RH
AUTOMATION & SAFETY CONNECTORS
Automatic Detection	Cabinet water volume, Steam pressure, and Vacuum pump monitoring
Safety Alerts	Real-time display & warning for insufficient steam or pressure
System Protection	Nitrogen protection (Optional/Auto); Tail gas treatment (Auto-control)
Exhaust Control	In-door and Out-door air exhausting with automatic valve control
GAS RECIPES & PROCESS
Supported Gas Recipes	Mixed Gas (CO2/EO mixtures: 70/30, 20/80, 10/90) and Pure EO (with N2)
Time Management	0-99 hours; Resolution: 1 min

Customized solutions for high-pressure chambers (>80KPa) and specific gas concentrations are available.

Technical FAQ

Expert insights into Bocon EtO Sterilization Hot Air Circulation Systems

EtO sterilization depends on the "Big Four" parameters: Gas concentration, Humidity, Time, and Temperature. Bocon's Hot Air System ensures that heat and moisture are distributed uniformly throughout the entire chamber load. This high-efficiency circulation eliminates cold spots and ensures that the EtO gas can penetrate dense medical device packaging effectively, regardless of their position in the sterilization chamber.

Our systems are engineered for high-precision thermal stability. We typically achieve a temperature uniformity of ±1°C or better within the chamber volume. This level of control is managed via advanced Siemens PLC controllers and high-accuracy RTD sensors, ensuring the process remains within the validated range required by ISO 11135 standards.

Since EtO is highly flammable and explosive, Bocon utilizes ATEX or IECEx-certified explosion-proof fans and specialized heating elements. The hardware is designed to prevent spark generation. Furthermore, the system is interlocked with the control software to ensure that the heating process only operates when gas concentrations are within safe levels, often involving nitrogen dilution as a safety cushion.

Absolutely. We provide modular solutions ranging from 1m³ laboratory units to 100m³ large-scale industrial chambers. We calculate the required thermal load and air exchange rates based on your specific product density and chamber volume to ensure optimal performance for your sterilization cycles.

To maintain medical-grade cleanliness and resist corrosion from sterilization gases, Bocon uses high-quality SS304 or SS316L stainless steel for all internal ducting, fan blades, and chamber surfaces. This ensures longevity and prevents any particulate contamination of the medical devices being processed.

Yes. All Bocon systems are equipped with advanced data acquisition capabilities. Every parameter—including temperature, pressure, and fan speed—is recorded in real-time. Our software is designed to be compliant with FDA 21 CFR Part 11, providing the electronic records and audit trails necessary for international regulatory inspections.