T'aano'ob le empresa

Hangzhou Bocon Mechanical and Electrical Equipment Co., Ltd( eto sterile machine manufacturer in china) was established in 2006. The office […]

Le esterilizador gas eto u 30 m³ consta u carcasa le esterilizador, le nu'ukulil auxiliar (dispositivo calentamiento yéetel ciclo térmico, dispositivo extracción ti' le vacío, dispositivo dosificación yéetel vaporización, dispositivo humidificación, dispositivo sellado, dispositivo procesamiento gas residual) yéetel le dispositivo monitoreo yéetel kaambalil yo'osal.

8.4.1 Closing the eto gas sterilizer Discharge Door 8.4.2 Opening the Loading Door 8.4.3 Loading Sterilization Items Use a forklift

The installation and layout diagram of the ethylene oxide eto sterilizer can be found in Appendix C, Figure C.1. 7.1

Le esterilizador eto ti' 12m3 táan ts'o'oksik ti' túuxtik k cliente

3.4.1 eto sterilizer machine Temperature Setting Range
The temperature setting range for the eto sterilizer is: 30 to 70°C

If a leak is detected in the eto sterilizer dosing pipeline during the administration process, immediately close the medication bottle, switch and the dosing valve on the main unit. Turn on the axial fan to ensure proper ventilation, and then proceed with repairs.

Note: Regardless of whether the equipment is in normal operation, malfunction, or maintenance state, if personnel need to enter the

Note 1: The Ethylene Oxide sterilization conditions must be obtained through validation confirmation and should be verified with monitoring and

The temperature of representative areas on the inner surfaces should be measured and recorded using temperature recording instruments that comply with the requirements of Appendix B.