Start cycle phase(Select parameters/sterilization recipe) Serial number Potentially risky content Risk assessment under existing process conditions Risk assessment of the

For the purposes of this document, the following terms and definitions apply in ethylene oxide sterilization 3.1 Aeration part of

Appearance Inspection: Check for any damage on the surfaces of the main machine, control rack, and electrical control cabinet.
Power Supply Check: Ensure the power supply meets the requirements and check the rotation direction of the water pump and vacuum pump.
Turn on the power and observe whether the instrument display values are normal; otherwise, cut off the power, inspect and repair before restarting.
Pipeline Inspection: Check for leaks in the water supply, vacuum, and medication delivery pipelines, and ensure all valves are in standby mode; adjust if necessary.

2.1.1 Ukupni oblik treba biti precizan, s glatkim, čistim površinama i ujednačenom bojom. Ne smije biti neravnina, oštrih rubova, pukotina, vidljivih ogrebotina ili neravnina.
2.1.2 Sav vanjski tekst, grafika i simboli moraju biti otisnuti jasno, s preciznim i trajnim oznakama.
2.1.3 Pričvršćivači moraju biti sigurno postavljeni. Svi upravljački prekidači i gumbi (ili gumbi) za podešavanje trebaju raditi glatko i pouzdano bez prepreka.

Within a certain range of gas concentration, the higher the concentration, the better theEO Gas Sterilization effect; beyond 1000 mg/L, the improvement in sterilization effect is not significant.

eto sterilization technologies vs others: Advantages and Disadvantages Sterilization is a critical process in infection control, ensuring that medical instruments