Company News

Hangzhou Bocon Mechanical and Electrical Equipment Co., Ltd( eto sterile machine manufacturer in china) was established in 2006. The office […]

The 30 m³ eto gas sterilizer consists of the sterilizer housing, auxiliary equipment (heating and thermal cycling device, vacuum extraction device, dosing and vaporization device, humidification device, sealing device, residual gas processing device), and monitoring and control device.

8.4.1 Closing the eto gas sterilizer Discharge Door 8.4.2 Opening the Loading Door 8.4.3 Loading Sterilization Items Use a forklift

The installation and layout diagram of the ethylene oxide eto sterilizer can be found in Appendix C, Figure C.1. 7.1

Sterilizatorul eto de 12m3 este gata pentru a fi trimis clientului nostru

3.4.1 Interval de setare a temperaturii mașinii de sterilizare eto
The temperature setting range for the eto sterilizer is: 30 to 70°C

Dacă se detectează o scurgere în conducta de dozare a sterilizatorului eto în timpul procesului de administrare, închideți imediat flaconul de medicament, comutatorul și supapa de dozare de pe unitatea principală. Porniți ventilatorul axial pentru a asigura o ventilație adecvată, apoi continuați cu reparațiile.

Note: Regardless of whether the equipment is in normal operation, malfunction, or maintenance state, if personnel need to enter the

Note 1: The Ethylene Oxide sterilization conditions must be obtained through validation confirmation and should be verified with monitoring and

The temperature of representative areas on the inner surfaces should be measured and recorded using temperature recording instruments that comply with the requirements of Appendix B.