3.4.1 eto sterilizer machine Temperature Setting Range
The temperature setting range for the eto sterilizer is: 30 to 70°C
Ukuqonda ukusebenza kwe-ETO Sterilizer: Izikhiye Zokusebenza kahle Funda kabanzi
If a leak is detected in the eto sterilizer dosing pipeline during the administration process, immediately close the medication bottle, switch and the dosing valve on the main unit. Turn on the axial fan to ensure proper ventilation, and then proceed with repairs.
Ethylene Oxide Leak Handling when using eto sterilizer Funda kabanzi
Note: Regardless of whether the equipment is in normal operation, malfunction, or maintenance state, if personnel need to enter the
Izidingo Zokuphepha Zokusebenzisa I-Ethylene Oxide ekubulaleni inzalo Funda kabanzi
Note 1: The Ethylene Oxide sterilization conditions must be obtained through validation confirmation and should be verified with monitoring and
I-Microbial Killing Performance ye-Ethylene Oxide Sterilizers Funda kabanzi
The temperature of representative areas on the inner surfaces should be measured and recorded using temperature recording instruments that comply with the requirements of Appendix B.
I-eto inzalo Ukuhlola Ukusabalalisa I-Chamber Temperature Distribution Funda kabanzi
Appearance Inspection: Check the main unit, control rack, and electrical control cabinet for any damage on the surface.
Preparatory Work Before eto Sterilization Funda kabanzi
Isigaba sokuqala somjikelezo(Khetha amapharamitha/iresiphi yokuvala inzalo) Inombolo ye-serial Okuqukethwe okungaba yingozi Ukuhlola ubungozi ngaphansi kwezimo ezikhona zenqubo Ukuhlolwa kwengozi
Imishini yokuvala inzalo ye-EO kanye nenqubo yamaphethini wesici nokuhlaziya umphumela Funda kabanzi
9.1 During ETO Sterilization, operators are not allowed to leave the operating area and must continuously observe the ETO Sterilization process. If any abnormal phenomena occur, the machine must be immediately shut down, and the power supply should be cut off for inspection.
Maintenance Guide for ETO Sterilizers Funda kabanzi
Ngezinjongo zalo mbhalo, imigomo nezincazelo ezilandelayo ziyasebenza ku-ethylene oxide sterilization 3.1 Ingxenye yokungenisa umoya
Imigomo nezincazelo ze-eto gas inzalo Funda kabanzi
Ukuhlola Ukubukeka: Hlola noma yimuphi umonakalo endaweni yomshini omkhulu, indawo yokulawula, kanye nekhabhinethi yokulawula kagesi.
Ukuhlola Ukunikezwa Amandla: Qinisekisa ukuthi ugesi uhlangabezana nezidingo futhi uhlole indlela yokuzungezisa iphampu yamanzi kanye nephampu yevacuum.
Vula amandla bese ubheka ukuthi amanani ensimbi ajwayelekile yini; uma kungenjalo, nqamula amandla, hlola futhi ulungise ngaphambi kokuqala kabusha.
Ukuhlolwa Kwepayipi: Hlola ukuvuza kwamanzi, i-vacuum, namapayipi okulethwa kwemithi, futhi uqinisekise ukuthi wonke ama-valve akumodi yokulinda; lungisa uma kunesidingo.
Umsebenzi Wokulungiselela Ngaphambi Kokwenza Inzalo Funda kabanzi