3.4.1 eto sterilizer machine Temperature Setting Range
The temperature setting range for the eto sterilizer is: 30 to 70°C
Understanding ETO Sterilizer Performance: Keys to Efficiency Read more
If a leak is detected in the eto sterilizer dosing pipeline during the administration process, immediately close the medication bottle, switch and the dosing valve on the main unit. Turn on the axial fan to ensure proper ventilation, and then proceed with repairs.
Ethylene Oxide Leak Handling when using eto sterilizer Read more
Note: Regardless of whether the equipment is in normal operation, malfunction, or maintenance state, if personnel need to enter the
Safety Requirements for Using Ethylene Oxide in sterilization Read more
Note 1: The Ethylene Oxide sterilization conditions must be obtained through validation confirmation and should be verified with monitoring and
Microbial Killing Performance of Ethylene Oxide Sterilizers Read more
The temperature of representative areas on the inner surfaces should be measured and recorded using temperature recording instruments that comply with the requirements of Appendix B.
eto sterilization Chamber Temperature Distribution Testing Read more
Appearance Inspection: Check the main unit, control rack, and electrical control cabinet for any damage on the surface.
Preparatory Work Before eto Sterilization Read more
Start cycle phase(Select parameters/sterilization recipe) Serial number Potentially risky content Risk assessment under existing process conditions Risk assessment of the
EO نس بندی کا سامان اور عمل کی خصوصیت کے نمونے اور اثر کا تجزیہ Read more
9.1 ETO نس بندی کے دوران، آپریٹرز کو آپریٹنگ ایریا چھوڑنے کی اجازت نہیں ہے اور انہیں ETO نس بندی کے عمل کا مسلسل مشاہدہ کرنا چاہیے۔ اگر کوئی غیر معمولی واقعہ پیش آتا ہے، تو مشین کو فوری طور پر بند کر دینا چاہیے، اور بجلی کی فراہمی کو معائنہ کے لیے منقطع کر دینا چاہیے۔
Maintenance Guide for ETO Sterilizers Read more
For the purposes of this document, the following terms and definitions apply in ethylene oxide sterilization 3.1 Aeration part of
ایٹو گیس سٹرلائزیشن کی شرائط اور تعریفیں۔ Read more
Appearance Inspection: Check for any damage on the surfaces of the main machine, control rack, and electrical control cabinet.
Power Supply Check: Ensure the power supply meets the requirements and check the rotation direction of the water pump and vacuum pump.
Turn on the power and observe whether the instrument display values are normal; otherwise, cut off the power, inspect and repair before restarting.
Pipeline Inspection: Check for leaks in the water supply, vacuum, and medication delivery pipelines, and ensure all valves are in standby mode; adjust if necessary.
Preparation Work Before eo Sterilization Read more